Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Tashiro, Shinsuke; Ono, Takuya; Amano, Yuki; Yoshida, Ryoichiro; Watanabe, Koji*; Abe, Hitoshi
Nuclear Technology, 208(10), p.1553 - 1561, 2022/10
Times Cited Count：1 Percentile：0.01(Nuclear Science & Technology)To contribute to the confinement safety evaluation of the radioactive materials in the Glove box (GB) fire accident, combustion tests with the Polymethyl methacrylate (PMMA) and the Polycarbonate (PC) as typical panel materials for the GB have been conducted with a relatively large scale apparatus. As the important data for evaluating confinement safety, the release ratio and the particle size distribution of the soot generated from the burned materials were obtained. Furthermore, the rise of the differential pressure (
P) of the high efficiency particle air (HEPA) filter by the soot loading was also investigated. As results, the release ratio of the soot from the PC was about seven times as large as the PMMA. In addition, it was found that the behavior of the rise of the P with soot loading could be represented uniformly regardless of kinds of combustion materials by considering effect of the loading volume of the soot particle in the relatively low loading region.
Serizawa, Hiroyuki; Kikuchi, Hironobu; Iwai, Takashi; Arai, Yasuo; Kurosawa, Makoto; Mimura, Hideaki; Abe, Jiro
JAERI-Tech 2005-039, 23 Pages, 2005/07
JAERI-Tech-2005-039.pdf:2.89MB
A high-temperature ultrasonic measuring system had been designed and installed in a glovebox (711-DGB) to study a mechanical property of nuclear fuel containing trans-uranium (TRU) elements. A figuration apparatus for the cylinder-type sample preparation had also been modified and installed in an established glovebox (142-D). The system consists of an ultrasonic probe, a heating furnace, cooling water-circulating system, a cooling air compressor, vacuum system, gas supplying system and control system. An A/D converter board and an pulsar/Receiver board for the measurement of wave velocity were installed in a personal computer. The apparatus was modified to install into the glovebox. Some safety functions were supplied to the control system. The shape and size of the sample was revised to minimize the amount of TRU elements for the use of the measurement. The maximum sample temperature is 1500 
C. The performance of the installed apparatuses and the glovebox were confirmed through a series of tests.
; ; Abe, Jiro; ; ;
JAERI-M 7601, 36 Pages, 1978/03
no abstracts in English
